ok ok ok theres a few thread about this one , the as01 clamps are narrower then normal correct?? well they seem to be for me , anyway im gonna be getting a front brake to suit them from DHZ off ebay , they informed me that you need a different brake to suit As-01's then the As-02/03 forks , mmmk have been thinking for a while to just buy a cheap china front wheel and getting them going (i mocked up a 14" from my old 140 and was to wide had to take the fork guards off or else they Just! scraped
okk well i need a 12" for it and i dont wanna settle for a cheap one (cant find the billet china ones in 12") so..... i got this Sano front hub laying around and thought i would see if i could make that work.....its like for 20mm axle???? its got its own built in spaces so with the narrow clamps it doesn't center properly so i put on some China CNC clamps i had which made it abit more roomy , now before i go out and spend like $200 for rim and the correct spokes for the hub do you reckon this will work and mount up to the fastace brakes , ill try get a pic now.
ok as you mite no the axle with the fastace forks have a built in spacer like big bike axles , and the sano axle sits over the spacer and half hangs over the 15mm , so i was thinking of making a spacer to get it from 15mm to 20mm for the hub to fit right .....
and the other question if i get a disc on the hub will i be able to get it to work with the fastace brakes if its not lined up , is it just a matter of spacing the disc further out?? or the caliper further in/out etcc
Thanks hope you can help