| Eclip is in the top of the carby, where the cable screws into carby,
the tube looking thing with the screw cap on it and the throttle cable coming out the top of it,
you unscrew the lid, and pull the throttle slide out, and theres a pin going down the middle, with 2 springs, a big one, and once thats removed, a tiny spring holding the eclip down, WATCH OUT IT WILL POP OUT AND YOULL LOOSE IT REAL EASY!!!
once the springs are removed, the pin will slide out, and youll see a tiny clip on the pin, the pin will have about 5 grooves/slots on it, you carefully pull the clip off and move it up or down on the pin,
moving the CLIP UP will LEAN IT OUT
CLIP DOWN will RICHEN IT
only move it 1 slot at a time, than re test,
MAKE SURE YOU LOOK HOW IT ALL WORKS BEFORE PULLING SPRINGS OUT ETC,
and when you reinstalling the slide in the carby, it will only go back in ONE way,
I doubt very much this will fix your problem, sounds more like dirty carby, or you have fiddled with mixture screws too much!!! |