Just thought i would make a new Thread for this new bike im building!!!!!! because i should be getting a few parts this week i hope!!!!!!! heres a bunch of pics so far enjoy , hopefully have a bunch more at the end of the week.
the engine mite be done tomorrow!!!! and the barrel has been painted the (frame) RED and have stripped the paint on the fins just need to get some fine sand paper to it and polish!!!
yer want to get a new pipe , coz that ones for stock 50 .. but o well it went alright on the 110 so should be good enough for a while .. and what you mean about the inlet manifold?
yer want to get a new pipe , coz that ones for stock 50 .. but o well it went alright on the 110 so should be good enough for a while .. and what you mean about the inlet manifold?
How big is the bore thru the intake ??? You need at the very least 22 mm and ideally 24 mm .... That carb looks like a 20 mm Keihin off an XR80 .... An 88 cc motor can handle a 22 mm Keihin , bigger intake and exhaust ports plus a 25 mm and up pipe .... Modded XR75's have a 24 mm intake and 28 mm pipe ........ and if done properly they'll pull an 80 two stroke (KX80/YZ80) in a standing start drag up to their top speed of around 54 mph ... It may be that CRF50 motors just can't cut it if people can't get that type of performance out of 'em ...
(UP PIPE)
Last edited by Cactus Jack : 01-09-2008 at 03:55 AM.
ill see how it goes wen i get it back , should be today or tomorrow im hoping .. , its still using the stock head which has pretty little ports... but i will be upgrading to the race head soon with i think its 25-22mm ports? im not the best with motors (which is why its at the mechanic)
(UP PIPE)
Linear Mode
