75cc kit for crf

[steve101]

hey guys just got my 09 and wanted just that little bit more power dont want an 88 kit just want that touch more pull up hills and stuff so has any body had any experience with these kits the kitaco one and would i need clutch springs and with the stock pipe will it still sound like a stocker? any help would be great

[jack_rides_stp]

Nice thread , wouldn't mind knowing the same questions

[steve101]

yeah thanx mate im buyin a bit of stuff for mine prob on monday and wanted to find out some stuff about this kit so if there not bad i will get them to get one in for me

[jack_rides_stp]

Yeah same , I want the 88cc but I dunno

And can ya use the stock carb

[unit_mx]

Well you get just a 75cc barrel and piston and some gaskets. All made in Tawain but.....

Daytona used to make them for $200 odd something.... Got it in my rb catalog around here somewhere

They go preety good , around 5hp from the daytona dyno reading. Thats a 2.5 hp gain.....

I'd get the TB kit , they are cheater kits hence the 49cm3 on the barrel. You dont tell anyone you have one in there. Just say ' its a really good tune'

Here's my ideal 'stocka' engine:
- TB 75cc or 88cc cheater kit (illegal)
- Kitaco 88cc cam ( Legal)
- Port and polish stock manifold ( semi legal haha)
- Uni filter ( Legal)
- Choke mod ( Legal)
- Grind out weld on the inside of stocka pipe ( Legal)
- Cut the baffel out of the inside of the pipe ( legal)
- Take the heat shields of the pipe and grind the mounts off , then sand the pipe down to make the surface smooth (legal)
- Get that tune perfect!!!
- Rev box! (legal)
- Kitaco super coil and paint it black haha ( illegal)
- Advance the timing 1 degree ( illegal)
- H/D clutch springs - so you can abuse that clutch

Would go like a 88 limited then , but dont tell anyone you did it. The power will make up for the lack of riding skills haha...
Plus still be super quite and super stock looking , no one will ever know!

The cheater kits are good , I've seen them as big as 90cc (so 88cc I'd say). Cast iron bore? With steel cylinder.... Not aluminium like the 88 limmo's

Preety basic instillation , bout half an hour if you know what your doing...
- ignition cover - pull it off
- cam cover , oil port cover , head cover , valve covers all off
- Flywheel to TDC , check cam sprocket lines up with the head line
- Pull the cam sprocket off whilst in gear , cam chain off
- undo head , pull head off
- undo barrel , pull barrel off , dowels out
- Slap the new base gasket on it , dowels , , piston , gudgon ring , clips , barrel
- cam chain through barrel , cam chain tensioner , head gasket , head , covers . Line it all up and then valve clearences.
- Top oil up , add fuel. Ready to ride!

30-1h jobbie.

Yes you can use a stock carb with the cheaters...


Whats the crf70 carb? Mybe one of those , dont tell anyone but....

Bretto will get cut because I've exposed his secret's about his stocker. No old man can really ride that fast haha

[steve101]

thanx mate i will deffinately be doin that i wasnt expecting that much info thanx again

[brucey_089]

u will never b able to tune a stocker with a kitaco 88 cam i had 1 in mine and it ran like a dirt bag iv herd of 2 other people with the same problem as i had i got either the taky or kami cam

[mini mullisha]

exposed my secrets haha your dreaming,my stockas is all legit!!ITS ALL RIDER!! hehe
And i was thinking of putting 1 of them 75 kits in my zeda but was still cheeper to get 88 bore up kit from classichonda50s,but you might still need a carb,manifold?
why go 75 when can go 88??

[steve101]

Originally Posted by mini mullisha

exposed my secrets haha your dreaming,my stockas is all legit!!ITS ALL RIDER!! hehe
And i was thinking of putting 1 of them 75 kits in my zeda but was still cheeper to get 88 bore up kit from classichonda50s,but you might still need a carb,manifold?
why go 75 when can go 88??

i dont wanna go 88cc i only use it around my house and a couple of mates places while we are hittin the ramps on big bikes and yeah just do wheelies on it.....it will never see a track thats what the big bike is for......thats why i want a 75 kit over an 88 kit oh and there only $190

[jack_rides_stp]

Awsomr , do ya have to rejet the carb