Pit Bike

dazza07 · #1 (**permalink**) 01-04-2007, 08:24 AM

dose any one know how to get a back wheel of as its a drum brake and the nuts just keep turning and its two diffrent types of nuts as shown in the pics below

daniel40 · #2 (**permalink**) 01-04-2007, 08:31 AM

get a mate to hold the other side with a shifter or somthing and for next time post this in tech talk general chat is for non mini releated stuff.

dazza07 · #3 (**permalink**) 01-04-2007, 08:41 AM

ok will post there next time its still turning when someone else is holding it ?

daniel40 · #4 (**permalink**) 01-04-2007, 08:44 AM

make sure there turning the opposite way you are

dazza07 · #5 (**permalink**) 01-04-2007, 08:48 AM

yes am doing that the full nut is turning at the oppiset end and when you get someone to hold it with anouthe rachet its still doing the same

daniel40 · #6 (**permalink**) 01-04-2007, 08:50 AM

i dont get wat u mean??? u need to hold one end one turns one wya the othere turns the other way

dazza07 · #7 (**permalink**) 01-04-2007, 08:56 AM

ave tryed that but it does not work

daniel40 · #8 (**permalink**) 01-04-2007, 09:00 AM

so it just keeps turning?? even with one person holding it with a shifter and teh other turning it??

stupidability · #9 (**permalink**) 01-04-2007, 09:14 AM

hi i have a prox 138 .me and a mate were getting some mad air but my forks bottom out .some people say to put pressure in them but the bike shops say not to (valves are only for bleeding air out) what to do couse we are jumping on the weekend.

Flarry · #10 (**permalink**) 01-04-2007, 09:43 AM

Make sure the socket on the nut isnt too big and the nut isnt just turning inside it... isnt that common sence?

Pit Bike

General Chat