Inner Rotor & Oil Slinger Installation

[Divy]

good stuff snitchy, you will find doing the forks pretty simple stuff

if you ever decide to change your clutch springs can you give me some pointers cause ive been holding it off cause i dont want to do it blind
the only part of an engine im not familiar with is the clucth

cheers keep up the good work and your doing a great job as a mod you seem to be the only mod that wants to clean up this site

[MITTZ]

great video snitchy!!! this might sound like a stupid question and it probly is! but u dont have to drain the oil b4 u take the side cover off the fly wheel do u? im 99% sure therees no oil in there but best to be safe. and also whats a good brand for an IRK, lightened fly wheel, CDI, and lightened oil slinger? and how much do they cost? and where can i get them?

thanks, andrew

[ducar.r.spec]

the flywheel is part of the irk
he means whenn u put the lightened oil sling in

[SnItChY]

Originally Posted by MITTZ

great video snitchy!!! this might sound like a stupid question and it probably is! but u don't have to drain the oil b4 u take the side cover off the fly wheel do u? I'm 99% sure Therese no oil in there but best to be safe. and also whats a good brand for an IRK, lightened fly wheel, CDI, and lightened oil slinger? and how much do they cost? and where can i get them?

thanks, Andrew

mate there's no such thing as a stupid question

it's either way mate u can drain the oil to make it less likely to spill and get ya parents pissed

or u can do it with the oil in

the IRK are all about the same there all just copy's unless ya wanna spend big bucks and go the genuine

as for doing the inner rotor part i left oil in
when i did the slinger i drained the oil (but i needed a change anyways)

as for the cdi it comes with the I/R

flee-bay has em all the time but don't forget to either get the slinger with the inner rotor or buy it separate but u have to install that to balance the crank

cheers for the feed back on the modding we are all trying just a couple of the guys wanna let me run a bit so i get used to it and ppl get used to me

cheers

[ducar.r.spec]

sean lets mod my bike hahahahahaha

[MITTZ]

ok great thanks snitchy. another question can i get better rebound out of my forks, iv got the rebound turned right up on the nob in top.

thanks

[SnItChY]

mittz im not the guy for ya on that 1

im a fork fool lol,i got no idea even tho im gunna do a oil change and make a vid of it

so i practise on zacs bike and then do mine for the vid hehehe

that ways if i stuff up its his bike and not mine hehehe
CHEERS

[MITTZ]

lol, ok ill ask someone else

[Sidney]

Hey snitchy changine the oil is easy once the forks are off the bike.

I took apart some chingas it's heaps easy, like 3 bolts to change the oil.

[SnItChY]

sid i can get the forks out np but from there im a lil lost

im doing a search here to find a thread on it