*Getting Bikes setup right* (Mods & Tips)

[PitRac3r]

hey guys
just wondering what would u suggest i do first to my bike in aftermarket performance parts??
thanks for your help
cheers chris

[nikson]

i have an atomik..was thinking foam air filter...definatly better handle bars cause i bent mine when i stacked..i think just trying to replace any of that shit house aluminium...maybe a quick turn throttle and some nice grips... customizing is up to you...but i know from experience that the bars on them are weak
cheers

[mad man]

replace the bolts with better quality ones, 1/4 throtle, mini pro tapers, re-enforce frame, new chain (sooner or later it will snap), chunky tires when you neeed to replace and maby a different sprocket set up

[eichkay]

Peg mounts first and re-enforce frame then make it perform better.. Air Filter, Port match the inlet mainfold then start on the rest, Rear shock, Better Tyres (mainly for better grip) , Change the Chain is a good idea aswell..

[goomber]

excuse my ignorance fellas, but what exactly is a 'quick turn' or '1/4' throttle?

[eichkay]

1/4 turn throttle is what it says it is... you only have to turn the throttle 1/4 of a turn to go from 0 to Wide Open...

Some bikes have 1/2 or more thottles which sucks arse IMO.

[AGRO]

1/4 throttle actually turns 40 degrees where as a normal throttle turns 90 degrees....

[r0ma]

Ive just got a similar model,

How exactly do you re-enforce the frame?

[PITBIKE_MULLISHA]

Originally Posted by mad man

replace the bolts with better quality ones, 1/4 throtle, mini pro tapers, re-enforce frame, new chain (sooner or later it will snap), chunky tires when you neeed to replace and maby a different sprocket set up

^^^
exactly my thoughts but with one addition
gripper seat and high foam base

[crazzy #1]

Originally Posted by PITBIKE_MULLISHA

gripper seat and high foam base

Originally Posted by mad man

1/4 throtle

i personaly thing these do not increase its performance... if you want a bang for buck... i would sujest going 16t front and 34t rear... this will increase the speed off ur bike, but and will have a large affect on 1st gear... but the question is, do you want the bike to make more power? last longer? or go faster?

if its all 3 id do everything that have been mentioned previously...

also what kind off bike are you running?