How should i fix the wobble. Adjust adjacent spokes one at time? However some spokes are poped out of their socket. Maybe due to heavy riders doing jumps.
information is the key to help my friend. The more you tell us the more we can help you. What size rim is it? when you say popped out of there sockets are you talking about the spokes locating in the recess in the hub or have you actually pulled the spokes out of the rim / hub? Depending on the size of your rim you may find that it will be impossible to locate all the spokes in the recess for the cone end of the spoke in the hubs. If you have actually pulled the spokes out of there threaded "nuts" in the rim then you may be best off throwing it in the bin and just getting a new one as you will need a new set of spokes and then hope you can pull your rim straight again.
If nothing is broken then what i would do is get a spoke spanner if you have one (or small shifter if your game) and pick the point of the wheel where the rim seems to have shifted over the most and tighten the spokes that are pulling the opposite way to the buckle. Keep and eye on spoke tension tho as you don't wanna go breaking them and you may have to loosen off the ones that hold it the direction that is it buckled.
Hope that helps ya. Remember if you try fix it and break it.... it was broken anyways.
try getting some new spokes if they are broken, otherwise just go around the wheel tightening each spoke a little and keep going round until all the spokes are tight, then make sure each one make a nice high ping when you give them a tap with a spanner or the like
get 10" SM Pro rims and so sweet ass Heavy Duty spokes =D dont waste your time with the poxy stuff of ebay and other places...
i spent the money and mind you if cost an arm and about 3 legs for what you get but bugger me i havent touched a spoke yet and mine cop a flogging =)
coolmo:- there goes that f-bomb again tsk tsk
__________________ No Tractions, Good Traction
Braaapster, 05 Limited Edition Pro
One of a kind, Only Two Made
Now Lifan Powered! 124cc of Power
It Loves to be out of control XD
IT ROLLS ON 10'S!!! 10's for life
Two 10 inch SM Pro Rims
Laced with Bridgestone M40's
Too many features, always adding! =)
dude throw a couple of pics up it will help heaps
but imo for $100.00 you can buy a new rim with a crap tyre on it
or you can spend 3hrs a day for the next 2 weeks re-spokeing a buckled rim
i know which way i would go about it
__________________
Fiddy Hoe's Before Fiddy Bro's
Ride:
Ciniworx pro 150 ms
Lifan 150
Fat bars
Heavy duty clutch springs
More trick bits to come
i paid abit over $80 for the 2 tens for my zed, unused second hand front disc rear drum with fairly decent tyres (front not fitted due to not having a caliper or master)
__________________
Rise of the Minis
Online Tech help>j_driver_75(at)hotmail.com
Rides:
Suzuki A100
Pocket Rocket trike
XE falcon S pack: 3 speed auto
I think the wheel is 15 inches. A couple of spokes poped out of the hub. It was a little wobbly when i bought it, decided to adjust spokes myslef now i screwed it up somehow and wheel is worse off then when i started.
How should i adust spokes. one by one as i go around or adjust adjacent spokes.
if its ur front it will be a 14inch
rear will be 12 inch
put ur bike on a milkcrate/stand
spin ur wheel and find the best part of the rim that is inline then, put a ziptie on ur swingarm so it just touches the rim in that straight spot
then each time the wheel rubs or becomes to far away adjust ur spokes
takes like an hour but its worth it
you mean out of the rim or the hub? wither way i think your guna need a new one
Got my MSO 140s 
No Tractions, Good Traction 
Linear Mode
