I ride a BSE but my son has a KX 60. We were out two weekends ago and riding through some massive puddles. After the ride i gernied the bikes down. Since then the oil in the kx60 has turned white. I changed the oil but it turned white fairly quickly. i thought the top end might need a rebuild but it is going great and it does not appear to be losing any coolant. After riding the air filter box had a fair amount of mud in it and the air filter was wet. Anyone got any ideas on what the problem could be. I would be happy to take it to a mechanic but i enjoy working through these problems myself if possible. Any advice appreciated.
Must have got water in through a case breather or blasted some back through a seal like around the shifter. Change the oil again till its all out and mind where you point a pressure cleaner.
water tends to turn oil qhite becouse it dilutes it
__________________
..::teAmpOcketrocket::..
47cc cag with....
20 degree timing key
air filter
triple stage reeds
lightened flywheel
racing bearings (6000s)
ada billet foot pegs(silver)
ngk bpm7a sparkplug and performance fuel lines and filter
13:1 comp headkit matched to engine case
full circle crank balanced
2 shoe adjustable race clutch
14/14 carby
fatboy exhuast
62 tooth rear sprocket
soon to be anodised frame (black)
20 degree timing key
air filter
triple stage reeds
lightened flywheel
racing bearings (6000s)
ada billet foot pegs(silver)
ngk bpm7a sparkplug and performance fuel lines and filter
13:1 comp headkit matched to engine case
full circle crank balanced
2 shoe adjustable race clutch
14/14 carby
fatboy exhuast
62 tooth rear sprocket
soon to be anodised frame (black)
Technical question?? 
Linear Mode
