4st 110cc how do i run them in??

hey guys,i have a brand new 2006 china made honda its a 110cc 4st how should i run it in???

same as any old motor, dont use synthetic for running in, use mineral based oils for the running in period. the way i run in is to run hard so the motor seals up nicely, gets plenty of heat for that initial seal so then its better for the life of the motor. run in for 1 - 2 tanks of fuel, after which time change your oil to a synthetic based oil, something like a 10 40w oil would be good. i use motul as you will find alot of people here do..

also have a look through the forums there are plenty of threads about how to run motors in allready.

if you still require more help, post up here again and im sure either myself or one of the other members of the forum will give you a hand,

Cheers, Tony.

__________________
Fire Up!

or just read & follow this....
http://www.mototuneusa.com/break_in_secrets.htm

that site really helps have any of you broke your bike in the wrong way and paid for the consequences

__________________
IF YOUR GONNA RIDE IT RIDE IT LIKE YOU STOLE IT

nope, i run mine in hard for hour blocks usually or a full tank but not like on the gas 24/7. just give it a fair amount of juice from time to time and it will run a treat.

Cheers, Tony.

__________________
Fire Up!

i would say a few,

__________________

that sucks what you do after that jus fix em or what

__________________
IF YOUR GONNA RIDE IT RIDE IT LIKE YOU STOLE IT

run motul 3000+ (mineral based oil) for the first 3 tanks then swap over to motul 5100 semi synthetic oil for the rest of the bikes life also always use the best fuel availible like premium fuel from most servos ,also out of the box most air filters are not pre oiled so make sure to do that ,use either proper air filter oil treatment or you can get similar results using sewing machine oil/multi purpose oil. also lube your chain up frequently to keep the drive train running smooth and mybe if your bikes runnin a crappy low quality plug out of the box to save time buy a decent spark plug from ngk or go all out and get an irridium plug from ngk or denso .make sure your tyres have the correct amount of air in them.That should be it

__________________
SUPPORT LOCAL 50 SHOPS!

Misc. quality parts for sale:

http://www.miniriders.com.au/mini-cl...tml#post246695

KTM250EXC


WWW.MXINK.COM.AU

I run Napa 10w-40 and take the bike up and down my street many a time. also do the occasional whellie to get everything nice and lubed